Water comprises of two parts of hydrogen and one part of oxygen. Only when it is distilled, you will see various amounts and types of substances present in it that includes chemicals, dissolved minerals and sediment. Water quality is not just significant for your home, but also very much critical for commercial settings.
It not just affects the flavor of beverage but also ensure that the equipment lasts for a longer time. Commercial water filtration systems provide the best way to filter water and get rid of all kinds of dirt and dust from it.
Areas where you can use a water filtration system
Effective and custom-tailored commercial solutions for water treatment
solutions for different kinds of businesses include:
- Religious institutions and Churches
- Fitness facilities
- Factories and power plants
- Car dealers
- Ice manufacturers
- Hatcheries and poultry farms
- Farms that use large scale irrigation
- State parks
- Trailer parks
Characteristics of Water
There are mainly four fundamental characteristics of water: hardness of water total dissolved solids, pH and alkalinity. Each of these characteristics will assist in determining the water quality and the kind of filtration system that works best in your situation. Let us understand each of these terms one by one.
Total Dissolved Solids
This characteristic measure inorganic and organic substances that are present in the water. These substances include minerals, metals, cations, salts, and anions, that gets dissolved in the water. Some of them are caused due to environmental factors such as runoff, wastewater, chemicals discharged from treatment plants, sewage etc.
Water hardness is an important property that measures scale-forming compounds. It is expressed in the form of measurements of parts/million, milligrams/liter, or grains/gallon. Magnesium and Calcium are commonest substances, but copper, aluminum, lead, iron and several other metals can also be present in it.
Alkalinity is a characteristic of water that measures and identifies the ability of water to neutralize the acid, specifically by testing for any presence of dissolved alkaline substances. All these substances are obtained from rocks, that contain bicarbonate, carbonate, and hydroxide compounds. When the amount of these substances is high in water, then it provides better resistance towards the changes in pH.
The final attribute of water is pH. It is a measurement that gives information about hydrogen ions concentration. This attribute checks the balance between alkaline and acid substances at a given point in time. The pH value of a water solution is between 1 to 14. 7 is considered to be neutral. The value of pH below is considered to be acidic, and the value above 7 is considered as alkaline.
Not considering water composition can result in serious damage to your equipment and a drastic increase in repairment costs. Thus, water filtration is a very important thing to consider. Hope the above information about the water filtration system, its use and different types, helps you prevent damage that occur due to impure water.